深部松软煤层钻孔孔周煤体变形产渣特征研究

针对煤矿井下高瓦斯软煤顺层长钻孔排渣困难、成孔率低、施工困难等问题,通过数值模拟实验研究了井下深部软煤体变形破坏特征,分析了顺层长钻孔孔周松软煤体变形特征及应力变化,以揭示顺层长钻孔孔周松软煤体变形产渣规律。研究表明:深部高瓦斯软煤顺层钻孔孔周煤体的应力平衡临界条件破坏后将发生大体积突然垮落;钻孔水平最大变形位移为1.22mm,垂直方向最大变形位移为10.7mm;径向孔周煤体垂向变形呈现逐渐减小趋势,且垂向变形明显大于钻孔水平变形。在水平方向上,钻孔孔周煤体应力分布呈现先增大再逐渐减小的变化规律,径向距离对水平应力分布的影响逐渐减小;随着径向距离的增加,钻孔孔周煤体应力分布逐渐降低,钻孔孔壁处煤体的应力出现最大值,且垂直方向处应力值最大。     

Developing an element free method for higher order shear deformation analysis of plates

A procedure is presented to eliminate transverse shear locking in analysis of laminated composite plates using Element Free Galerkin (EFG) method based on higher-order transverse shear deformation theory (HSDT). In the procedure, derivatives of the transverse displacement are introduced as independent variables. Thus, a formulation requiring C⁰ continuity shape functions for approximation is proposed for higher-order transverse shear deformation analysis of plates. Shear locking is avoided considering reduced integration for shear stiffness matrix; a method which is implemented in FEM. Moving Least Squares (MLS) method is utilized for shape functions and the penalty method is implemented to impose approximate boundary conditions. The present solutions are verified with other higher-order shear deformable studies. Moreover, a comparison between the present solutions with those obtained by EFG procedure based on First-order transverse Shear Deformation Theory (FSDT) is performed.     

Molecular Dynamics Study of Radial Corrugation in Carbon Nanotubes

Molecular dynamics simulations of multiwalled carbon nanotubes under hydrostatic pressure are performed to elucidate the novel class of radial buckling in the systems. It is revealed by all-atom simulations that the initial circular cross section transforms into a flower-like wavy configuration at critical pressure on the order of hundreds mega pascals or less. This kind of radial buckling, called radial corrugation, originates from the competition of the three relevant energies in the system: in-plane strain energy, van der Waals interaction energy between adjacent tubes, and out-of-plane bending energy. Their possible consequences for physical properties of carbon nanotubes are also discussed.     

72B�߲��ƻɶ���ԭ�����

 72B线材在绕簧过程中发生了断裂现象。利用金相显微镜对断口附近的金相组织、非金属夹杂物和表面形貌等进行了分析。结果表明：钢丝表面有损伤，且损伤部位出现横向裂纹和形变马氏体，这是导致绕簧过程中发生断裂的主要原因。针对断裂产生的原因，提出具体的改进措施。     

Deformation mechanism in NiAl single crystals at low temperatures

Available data on the temperature dependence of yield stress and of associated activation volume of high-purity NiAl single crystals between 76 and 205 K have been analyzed within the framework of a solid-solution hardening model, which is based on the concept of depinning of an edge-dislocation segment from several randomly dispersed, isolated, point defects simultaneously. The vacancies in NiAl single crystals act as point-defect obstacles to the stress-assisted thermally-activated glide of edge dislocations, and their concentration is estimated as about 10 at.%. The product of yield stress and associated activation volume (≈0.146 eV) is found to be independent of temperature and yield stress, as envisaged in the model.     

Nonlinear response in glass fibre non-crimp fabric reinforced vinylester composites

This paper addresses the nonlinear stress-strain response in glass fibre non-crimp fabric reinforced vinylester composite laminates subjected to in-plane tensile loading. The nonlinearity is shown to be a combination of brittle and plastic failure. It is argued that the shift from plastic to brittle behaviour in the vinylester is caused by the state of stress triaxiality caused by the interaction between fibre and vinylester. A model combining damage and plasticity is calibrated and evaluated using data from extensive experimental testing. The onset of damage is predicted using the Puck failure criterion, and the evolution of damage is calibrated from the observed softening in plies loaded in transverse tension. Shear loading beyond linear elastic response is observed to result in irreversible strains. A yield criterion is implemented for shear deformation. A strain hardening law is fitted to the stress-strain response observed in shear loaded plies. Experimental results from a selection of laminates with different layups are used to verify the numerical models. A complete set of model parameters for predicting elastic behaviour, strength and post failure softening is presented for glass fibre non-crimped fabric reinforced vinylester. The predicted behaviour from using these model parameters are shown to be in good agreement with experimental results.     

塑料牙刷柄的傅立叶变换红外光谱分析

本文采用傅立叶变换光谱法对13种不同品牌的白色牙刷柄塑料进行了红外光谱分析,实验结果表明,依据红外光谱数据的异同,能够对不同品牌的牙刷柄样品进行鉴别。